# v1.13.3 - 2020-05-22 ### Features - Support for new hardware: - G4 Doorbell - Display actual disk write throughput on UCK-G2-Plus LCM (firmware 1.1.13+ required) ### Improvements - Added separate alert type for G4 Doorbell ring events - Show camera name in email notification subject when possible - User's info will be synced with the cloud every minute - Introducing two-step firmware upgrade process for G4 Series cameras with old firmware versions (up to 4.14.56) - Web UI: - Improved live stream buffering logic - Camera firmware: - Motion Analytics: - All G4 Series models will use higher resolution MV for better accuracy - Improvements to "Enhanced" motion algorithm - G4 Series: - Image quality improvements in HDR mode - G4 Bullet: - Improved IQ at night scene - G3 Series: - Switch to black and white when entering night mode - G3 Pro: - Improved autofocus - ViewPort firmware: - Changed LED behavior to match cameras - Discovery service will be kept always on - Improved reset logic ### Bugfixes - Failed controller update requests will be discarded - Security: - Resolves undisclosed vulnerability that could allow running custom commands on a device or allow View Only users to assign themselves other unauthorized roles - Web UI: - Fixed an issue where on wide screens datepicker was fixed in the right corner - Camera firmware: - Fixed a possible OOM issue which could cause firmware update to fail - G4 Pro: - Fixed HDR AE misbehaving in the snow - Fixed issue causing the camera to go into the night mode on strong direct light - G3 Series: - Fixed issues that caused camera reboots - G3 Pro: - Fixed blue-ish picture color in the early mornings - G3 Micro: - Fixed an issue resulting in camera losing WiFi settings upon power cycle --- # v1.13.2 - 2020-03-05 ### Features - Web UI: - Added an option to show event motion heatmap overlay (toggle with an icon in the video player) - Added an ability to choose the motion detection algorithm version for each camera (under Recording > Motion Algorithm in the sidebar) ### Improvements - Motion zone sensitivity value now reflects the actual setting on camera without adjustments (now new zones will default to 75) - Reduced memory usage while creating a support file - Now activity alert emails will be sent from no-reply@ui.com - Web UI: - Updated event page filter bar and date picker - Support file filenames are now unique and include a timestamp - Minor accessibility improvements ### Bugfixes - Web UI: - Fixed a crash when opening timelapse page while all cameras are offline - Fixed invalid times displayed on Chrome 80 - Fixed an issue which resulted in event filters resetting automatically - Camera firmware: - Reverted default motion detection algorithm to the previous version --- # v1.13.1 - 2020-02-04 ### Important notes - 1.13.x controller versions are NOT UniFi OS compatible - We recommend reviewing the motion zone settings for each camera as the improved motion detection algorithm may require adjustments to zone sensitivity to yield the same results as the prior release ### Features - Wireless cameras can now be detected and adopted via Wireless Uplink on a UniFi Network running up to date controller and AP firmware - Connected devices now will be kept up-to-date with the latest firmware patch version without controller restart and device re-connect - Support for new hardware: - UFP ViewPort - G4 Bullet - Web UI: - Added hover controls for mute and snapshot to live view camera feeds ### Improvements - Device firmwares are no longer bundled with the controller - Improved handling of duplicate camera IP addresses - Web UI: - Major video pipeline refactor - Administrators can now change local account passwords via the cloud - Improved the names and order of cameras in the "Add Devices" dialog - Device list now has filterable columns - Live players now start muted - Added "Controller" and "Web UI" to the version numbers in settings - Removed unsupported browser warning for Chromium-based Edge versions - Camera firmware: - Upgraded motion detection algorithm ### Bugfixes - Now motion-only recordings include all the related footage - High-resolution cameras use correct bitrate by default - Web UI: - Fixed overflow and scrolling issues in the sidebar --- # v1.12.5 - 2019-10-14 ### Fixed - Fixed a camera connection issue - Fixed an issue in the way video files are recycled --- # v1.12.3 - 2019-09-18 ### Changed - Web UI: - Increased connection timeout to 15 seconds ### Fixed - Fixed a timelapse playback issue --- # v1.12.1 - 2019-09-13 ### Fixed - Fixed an issue with live camera feeds --- # v1.12.0 - 2019-09-10 ### Added - Web UI: - Added a new Recording tab to the camera panel! New options include: - When to record (always, never, motion events) - Minimum seconds of motion to trigger an event - Number of seconds to record before and after a motion event - Redesigned controller setup flow - Allow setting location in settings - Sending of alerts can now be based on geolocation - Improved transcoding, live stream channels, and video export - Cameras now log directly to controller - Improved logging when a crash occurs ### Fixed - Web UI: - Fixed an issue which prevented adoption of UVC G3 Flex - Fixed an issue with latitude/longitude coordinates - Expanded the settings page on larger screens - Improved treatment of offline cameras - Added feedback while forgetting cameras - Fixed a crash from unauthorized access to other users - Various fixes to modal windows - Updated camera firmware to v4.15.67: - Fixed an autofocus issue with UVC G4 Pro - Fixed a crash due to invalid data from a discovered device - Fixed a crash that could occur when disabling cloud access - Improved timeout and handling of a non-responsive process - Fixed various issues related to backups and factory reset --- # v1.11.3 - 2019-07-25 ### Fixed - Improved handling of a process deadlock --- # v1.11.2 - 2019-07-09 ### Fixed - Fixed an issue which could cause camera settings changes to not take effect --- # v1.11.1 - 2019-07-02 ### Added - Web UI: - New and improved Settings page - New and improved Account page - New and improved Add Devices page - Initial support for exporting up to 24 hours of video at a time (UX to be improved later) - Experimental support for Safari v12.1+ ### Fixed - Web UI: - Fixed several issues that could cause the web ui to crash - The datepicker in Timelapse now closes when clicking outside of it --- # v1.10.0 - 2019-06-05 ### Added - Web UI: - Added support for alert rule schedules! - Add links to Timelapse from Camera and Event lists - Now supports adding and editing custom user roles - Redesign camera/user grid views and remember list/grid selection - Increase timelapse zoom 8x - Update timelapse playbar to include play time - Add HDR toggle to live player - Add GMT to the list of time zones - Updated user panel - Fixed an issue with UVC Pro aspect ratio - Fixed various permissions issues - Improved add/invite user flow in Web UI - Added option to turn off IR LEDs while leaving IR cut filter on - Timelapse is now rendered using the controller timezone ### Fixed - You can no longer import backups from versions newer than the current version - Fixed slow events API responses causing disconnects or service restarts - View only users can now properly access and play back Events - Clean up old events when we no longer have video - Make from/subject fields consistent across email alerts - Fixed an issue with live views not having the correct owner after backup restore - Misc performance optimizations --- # v1.9.4 - 2019-04-30 ### Fixed - Remote connections from iOS devices should now be more reliable - Fixed an issue causing less than expected retention duration - Fixed an issue that could trigger multiple update downloads at the same time, causing update to fail - Fixed an issue causing snapshots to fail to load and motion events to never end - Performance optimizations and improvements --- # v1.9.2 - 2019-04-02 ### Added - Improved support for video player settings on smaller resolutions - Updated push notification text (requires mobile app update) - Better read/playback performance for newly recorded video - You can now change your local password over cloud without providing your current password - Users can now change their passwords on the user panel - The popout video player now supports resolution selection - Timelapse UI improvements: - Scale is now adjustable - New events are now rendered live as they happen - Improved time range selection - Performance optimizations ### Fixed - Fixed an issue causing camera disconnects on WebRTC connection failures - Fixed a crash due to malformed discovery packets - Fixed an issue causing exported timelapse video to not be playable - Fixed an issue where two managed cameras (one offline, one online) were assigned to the same IP - Fixed "Bad Certificate" error when trying to download files in Chrome - "Update Available" notifications are now only sent once per update - Switching to tile mode on the Users page no longer crashes the Web UI - Opening Timelapse with no managed cameras no longer crashes the Web UI - Fixed an issue which prevented in-app notifications from closing - G4 Pros now properly show "4K Ultra HD" instead of 1080p in the player quality dropdown --- # v1.8.1 - 2019-03-04 ### Added - UI: - Users can now change their passwords on the user panel - The popout video player now supports resolution selection - Updated camera firmware to v4.10.12 ### Fixed - Notifications: - Push notifications are now sent as soon as motion is detected - Notifications and emails are now properly being sent when updates are available/installed - Fixed an issue where users would not receive online/offline notifications after a backup restore - Changes to recording settings now take effect immediately - Improved support for higher bitrate settings - Fixes to Web UI when accessing via IP with no internet connection - Email addresses of invited users are now retained across updates --- # v1.7.0 - 2019-02-18 ### Added - "In progress" events now update when they end - Refreshed the design and functionality of the live stream player and settings controls ### Fixed - The default sorting for events is now restored (newest to oldest) - Fixed an issue with in progress events being displayed on the wrong date - Fixed an issue with adjusting IR LED levels for G3 Pro and G4 Pro cameras - Permissions are now correctly enforced on various API endpoints - UI: - Fixed an issue with timelapse scrolling - Fixed motion and privacy zones when camera orientation is flipped - Fixed an issue which was preventing users from disabling system alerts - Prevent View Only users from adopting wireless cameras - Removed support for 16x playback speed --- # v1.6.1 - 2019-02-08 ### Fixed - Fixed an issue causing some users to not see updates - Fixed an issue causing IR to be disabled on some cameras --- # v1.6.0 - 2019-02-04 ### Added - Added support for custom user roles (mobile apps only, Web UI support to come later) - Unmanaging a camera will now factory reset the camera - Users (besides the super admin) can now remove themselves - Web UI: - Added support for Maximum Retention Time (Under Settings > General) - Added ability to delete footage from within Timelapse - Added thumbnails to Timelapse events - Added a toggle for camera Status Sounds (Camera Pane > General) ### Fixed - Fixed a bug with video export that would cause exports to fail (especially longer clips) - Fixed issues with adopting L3 cameras - Fixed an issue where unmanaging and remanaging a camera could cause cause the camera to no longer record - Fixed an issue which could cause some streams to record twice - Support files and device password are now only visible to admins - Shared live views can now only be edited/deleted by the user who created it - Updated camera firmware to v4.9.25: - Fixes an issue with getting camera support files - Allowed FPS values are now less restrictive - Misc bug fixes and improvements - Web UI: - Fixed a crash caused by trying to view events for unmanaged cameras - Fixed a bug that crashed the UI while leaving Timelapse - Fix a bug with 15s rewind in Timelapse - Fix mute icon in Timelapse - Checking for updates when an update is available now no longer shows "Your NVR is up to date" - Web UI is now more responsive when updating or restarting UniFi Protect - You can now close the browser support warning - To be consistent with the mobile apps, alert rules can no longer be enabled/disabled individually - Misc cosmetic updates --- # v1.5.0 - 2019-01-14 ### Added - New and improved alert rules (accessible via Settings) ### Fixed - Motion and privacy zones now follow camera orientation - Fixed a service restart issue for iOS users - Live views now persist across service restarts - Now properly tracks NVR update events (separate from offline events) - Backups are deleted during factory reset - Fixed an issue causing motion events to sometimes never end - Misc bug fixes and improvements --- # v1.4.2 - 2018-12-14 ### Fixed - Fix fullscreen mode for Live View in Chrome - Fix issue with downgrading in 1.4.1 --- # v1.4.1 - 2018-12-11 ### Added - Users now stay logged in across controller restarts ### Fixed - Automatic updates will now wait for all users to disconnect before installing - Backups are deleted during factory reset - Alerts for camera disconnects happen right away instead of when the camera reconnects - Misc bug fixes ### User Interface - Future updates will now show an alert with the possibility to view the Changelog before installing - You can now access the latest Changelog from settings - Clip export is now available in Timelapse - Timelapse now has a date picker - Misc bug fixes and improvements --- # v1.3.0 - 2018-11-12 ### Added - Added support for backup export/import/restore/delete ### Fixed - Fixed RTSP stream issue on medium channel - Fixed an issue affecting some cameras which would result in no audio ### Changed - Updated UI to v1.8.1 --- # v1.2.2 - 2018-10-15 ### Added - Added rate limiting to login requests - Allow users to login locally with e-mail in addition to username - New motion detection algorithm for cameras ### Fixed - Make login username/e-mail case insensitive - Fixed issue resulting in camera default names being "undefined XXXX" - Fixed issue where cameras discovered while on older versions would not be manageable unless cleared from DB manually - Fixed issue where changing FPS on a camera would cause recording to stop until service restart - Reduce image sizes in notification emails - Fixed issue where some settings would not properly update after "Reset All" ### Changed - Updated camera firmware to v4.7.29 - Updated UI to v1.7.0 --- # v1.1.0- 2018-09-11 ### Added - Add support for master camera password - Add push notification support - Add backend support for backup export and automatic backups (not yet exposed via UI) ### Fixed - Fixed deb dependencies to allow for installs on Ubuntu 16.04/18.04 - Fixed critical issue where disk space was not being properly cleaned up, resulting in shortening retention times. - Fixed issue where RTSP Streams would stop working after a camera reboot until service restart - Fixed support for UVC Pros (G2) ### Changed - Updated UI to v1.5.1 ---